inst_honsan

INSTALLATION NOTES

HON/SAN DMX V.1
HONDA ACCORD TO SANYO CD INTERFACE
1998-2002
ELECTRONIC INTERFACE CONVERTER
PATENT PENDING - MADE IN USA

CONGRATULATIONS! AND THANK YOU, FOR PURCHASING THE HONDA / SAN DMXV.1 ELECTRONIC INTERFACE CONVERTER THE MOST ADVANCED AND ONLY CONVERTER AVAILABLE FOR THE HONDA ACCORD (MY 1998-2002) TO SANYO CD CHANGERS.

THIS ELECTRONICS INTERFACE CONVERTER IS THE ONLY CONVERTER THAT WILL ALLOW THE ACCORD CD CONPACTIBLE RADIOS (MODEL YEAR 1998-2002) TO INTERFACE WITH THE AUDIO VOX SANYO BASE CD CHANGERS.

INSTALLATION INSTRUCTIONS:

1) REMOVE RADIO FROM DASH, PLUG THE HONDA /SAN DMXV.1TO THE BACK OF THE RADIO, RUN THE CABLE SUPPLIED WITH CHANGERS TO THE TRUNK.

2) PLUG THE SANYO CABLE TO THE HONDA /SAN DMXV.1 ELECTRONIC INTERFACE CONVERTER AND THE 8 PIN DIN CONNECTOR FROM THE SANYO CABLE TO THE CD CHANGERS

3) MOUNT THE SANYO CD CHANGER UNDER THE HAT DECK. USE 4 SELF-TAPING SCREWS SUPPLIED WITH THE CHANGER.

4) WITH RADIO “OFF” TURN THE IGNITION SWITCH TO THE “ON” POSITION , TURN RADIO ON.

5) PRESS CD BUTTON ON RADIO.

NOTE: IF YOU USE A 10 DISC CHANGER TO ACCESS THE UPPER BANK FOR DISC 7 PRESS 6+1

FOR DISC 8 PRESS 6+2 FOR 9 PRESS 6+3 FOR DISC 10 PRESS 6+4

CD CHANGER MODELS

AUDIO VOX	BLAUPUNKT	SANYO
6-DISC SP6CD	6 –DISC CDC-RF61R	6-DISC MAX300
10 DISC SP10CDS	10-DISC AX500	10-DISC EAX510

TECHNICAL HELP LINE 201-569-5000 EXT. 5105 M-F 11AM - 4PM EST
TECHNICAL HELP: techsupport@blitzsafe.com